An Investigation into the Effect of Advanced Gravity Separation on Platinum Group Metals (PGM) Flotation Concentrates
No Thumbnail Available
Date
2024
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
University of the Witwatersrand, Johannesburg
Abstract
“It's the gravity that shapes the large-scale structure of the universe, even though it is the weakest of four categories of forces” - Stephen Hawking Gravity concentration has been around since the dawn of mankind, and just as man has evolved so too has gravity concentration. The earliest records involved ancient cultures (Greeks, Romans, Mayans and Egyptians) using water to selectively separate precious metals from gangue. Gravity concentration has remained an integral part of many processes involving the recovery of native or alluvial precious metals and minerals which are amenable to this process. Developments in gravity concentration technology have led to the inception of advanced gravity separation devices. These advanced gravity separators can overcome the challenges associated with conventional gravity concentration as they are able to induce a high gravitational force that is capable of recovering fine and ultrafine heavy particles as well as particles with a complex mineralogy. Decreasing feed grades and falling metal prices are placing an exorbitant amount of pressure on the PGM industry. As a price-taker, the industry is at the mercy of the prevailing market conditions. This means that the only levers the industry can use are cost cutting or optimization of the process to produce more PGMs at a better quality from the current feed source. The premise of this research project is to essentially find a way to optimize the PGM beneficiation process by the use of gravity concentration. This research specifically targeted the high-grade flotation concentrate stream of a UG2 tailings plant to understand how effective advanced gravity concentration would be in recovering PGMs, upgrading the resulting concentrate as well as rejecting chromite and gangue. PGMs are associated with base-metal sulphides and are inherently complex. This complexity is further exacerbated by the fact that PGMs are in the fine to ultrafine particle size range which makes recovery of PGMs challenging. Gravity concentration is primarily a function of particle size, density and mineralogy. Separation of gangue and chromite from PGMs is another added complication as the gangue minerals are present in higher concentration than the PGMs, have a complex mineralogy and are also found in the fine and ultrafine particle sizes. Fire Assay/ICP- ii MS, XRF, XRD and SEM all confirmed the complexity of the ore being treated. This ‘entanglement of complexity’ makes processing these ores very challenging. A lab-scale Falcon gravity concentrator with an unfluidized (ultrafine) bowl was used in the main experimental work. The optimal parameters to run the gravity concentrator for PGMs was found to be a flow rate of 3 L/min, percent solids of 13.22% and a gravitational force of 300 G’s. These parameters were then applied to a multi-stage gravity concentration process. The feed to the gravity concentrator was found to have a grade of 131.02 g/t 4E PGM. The results indicated that a recovery of 48.90% and a final concentrate grade of 292.04 g/t 4E was achieved at a mass pull of 21.90%. The chromite in the final concentrate of the Falcon gravity concentrator was found to be 1.99% which did not exceed the maximum allowable chrome in concentrate of 3.00%. This proved that gravity concentration was indeed capable of recovering complex PGMs and rejecting chromite. The optimal parameters experiments indicated repeatability, and the assay results were validated by a statistical outlier test in the Minitab Software to ensure data integrity. The particle size analysis revealed that 97.07% of the feed to the Falcon was below 75μm and 66.29% below 25μm, thus confirming that the feed material was fine to ultrafine particles. The final gravity concentrate had a D90 of 42.24μm which was finer than the D90 for the feed, this demonstrates that fine and ultrafine heavy particles were more mineralized and recoverable by the Falcon. This analysis was further reinforced by the fractional analysis which confirmed that the majority of the PGMs were found in the fine to ultrafine fraction. The experiments were repeated using a fluidized bowl in the Falcon to see what the impact of fluidizing water would be. These experiments had lower overall recoveries and mass pulls than those done with an unfluidized bowl. The concentrate grade was, however, higher than the unfluidized bowl experiments possibly due to this bowl recovering PGMs in the coarser fraction. This research provides a steppingstone to understanding the effect of advanced gravity concentration on PGM flotation concentrates and indeed on PGMs in general as well as providing an alternative unique processing option for PGMs. Ultimately advanced gravity concentration has been shown to be an uncomplicated process that can be viable in the recovery of fine and ultrafine complex PGMs. It is environmentally friendly, has low capital and operational costs and has a relatively high efficiency.
Description
A research report submitted in fulfillment of the requirements for the Master of Science in Engineering, In the Faculty of Engineering and the Built Environment , School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg, 2024
Keywords
UCTD, Advanced gravity concentration, Platinum Group Metals, PGM Flotation, PGM Concentrates, Chrome, Base metal sulphides
Citation
Nair, Taurean Jevaldo . (2024). An Investigation into the Effect of Advanced Gravity Separation on Platinum Group Metals (PGM) Flotation Concentrates [Masters dissertation, University of the Witwatersrand, Johannesburg]. WIReDSpace. https://hdl.handle.net/10539/45398