School of Civil & Environmental Engineering (ETDs)

Permanent URI for this community

https://hdl.handle.net/10539/37962

Browse

Browsing School of Civil & Environmental Engineering (ETDs) by SDG "SDG-6: Clean water and sanitation"

Now showing 1 - 5 of 5
  • Thumbnail Image
    Item
    Addressing high dimensionality in water quality modelling in water distribution networks
    (University of the Witwatersrand, Johannesburg, 2024-02) Machweu, Morongwa Ednah; Taigbenu, Akpofure
    Water quality models are the most effective tools for characterizing water quality conditions, assessing the effects of water pollution, and supporting decision-makers with water quality management. They can be utilised for detecting the variations in the water quality parameters. Despite the usefulness of water quality models, an appropriate and simple water quality descriptor for a particular application, considering the high dimensionality of various water quality parameters, remains a challenge (Chapman, 1992). To address this high dimensionality, a single dimensionless index is commonly used to describe water quality for a particular application. While pollution loads at various points in a river reach have been widely assessed by studies using water quality indices, little research has been done on water distribution networks with service reservoirs and a variation of loading conditions. In a water distribution network, service reservoirs function similarly to rivers in that they have complicated mixing mechanisms, are subject to a variety of water quality factors, and are sized and located differently. The most common water quality indices require the formation of subindices and weights to avoid ambiguity, eclipsing and rigidity. The Canadian Council of Ministers of the Environment Water Quality Index (CCME WQI) does not require the formation of sub-indices and weights, thus providing a simplified way of describing water quality. This study investigates the use of the CCME WQI to address high dimensionality in water quality modelling of water distribution networks, taking into consideration the locations of multiple service reservoirs. This study was carried out primarily for decision-making and design optimization purposes only. Using EPANET 2.2, four hydraulically optimised solutions (which satisfied minimum pressure requirements) were further analysed for water quality performance. This was achieved by incorporating simulated data on three water quality variables (chlorine residual, water age and THM concentration) into the CCME WQI for a hypothetical water distribution network, Anytown. The results indicate that two of the four hydraulically optimised solutions achieved excellent water quality levels. This study has demonstrated the usefulness of a dimensionless index as a proxy for multiple water quality variables of a water distribution system in facilitating decision-making.
  • Thumbnail Image
    Item
    Effect of pipeline pigging on raw water pipeline flow rate and energy consumption
    (University of the Witwatersrand, Johannesburg, 2024-02) Phillip, Neil Claude; Ndiritu, John
    Pipeline pigging is a widely used method of pipeline cleaning to improve the hydraulic efficiency of a pipeline system, reduce deposits within a pipeline, reduce operational costs and improve water quality. With insufficient pipe cleaning, pipeline deposits accumulate within the pipeline which reduces the cross-sectional flow area of the pipeline and increases the friction losses in the pipeline. This subsequently reduces the operating flow rate, increases the pumping cost of the system, and reduces the water supply to the surrounding area. Therefore, the study aimed to investigate the hydraulic improvements and operational cost savings of a pipeline system after pigging and to determine when pigging should be done. A case study of the Tayside high lift pump station in South Africa was used for this investigation. Results indicate that pigging removes deposits and sediments from the pipelines thereby increasing the flow rate while reducing the cost of pumping substantially. The increase in flow rate calculated from the case study was 23.9% after one of the pigging operations in 2016. In addition, the pigging operations completed yearly also indicated a flow rate increase after pigging. The study showed that the increase in sediment levels of the raw water in the rainy season led to a reduction in the hydraulic capacity of the pipeline indicating an increase in sediment deposition in the pipeline. Life cycle cost analysis of the case study system obtained annual cost savings of R991,800.59 over a 50-year period. Based on the findings, a flexible routine for pigging based on the reduction in the hydraulic capacity of the pipeline is proposed to cater for the variability in levels of sediment in the raw water in alignment to the rainfall and streamflow patterns. This allows the pipeline to operate at the lowest energy cost and at the highest possible flow rate.
  • Thumbnail Image
    Item
    Improving the Penalty-Free Multi-Objective Evolutionary Design Optimization of Water Distribution Systems
    (University of the Witwatersrand, Johannesburg, 2024-02) Kambalame, Emily; Ndiritu, John
    Water distribution networks necessitate many investments for construction, prompting researchers to seek cost reduction and efficient design solutions. Optimization techniques are employed in this regard to address these challenges. In this context, the penalty-free multi-objective evolutionary algorithm (PFMOEA) coupled with pressure-dependent analysis (PDA) was utilized to develop a multi-objective evolutionary search for the optimization of water distribution systems (WDSs). The aim of this research was to find out if the computational efficiency of the PFMOEA for WDS optimization could be enhanced. This was done by applying real coding representation and retaining different percentages of feasible and infeasible solutions close to the Pareto front in the elitism step of the optimization. Two benchmark network problems, namely the Two-looped and Hanoi networks, were utilized in the study. A comparative analysis was then conducted to assess the performance of the real-coded PFMOEA in relation to other approaches described in the literature. The algorithm demonstrated competitive performance for the two benchmark networks by implementing real coding. The real-coded PFMOEA achieved the novel best-known solutions ($419,000 and $6.081 million) and a zero-pressure deficit for the two networks, requiring fewer function evaluations than the binary-coded PFMOEA. In previous PFMOEA studies, elitism applied a default retention of 30% of the least cost-feasible solutions while excluding all infeasible solutions. It was found in this study that by replacing 10% and 15% of the feasible solutions with infeasible ones that are close to the Pareto front with minimal pressure deficit violations, the computational efficiency of the PFMOEA was significantly enhanced. The configuration of 15% feasible and 15% infeasible solutions out performed other retention allocations by identifying the optimal solution with the fewest function evaluations.
  • Thumbnail Image
    Item
    Use of Multispectral Satellite Imagery to Monitor the Decant Pond of Tailings Dams
    (University of the Witwatersrand, Johannesburg, 2023-08) O’Donovan, Christopher Galen; Adam, Elhadi; Torres-Cruz, Alberto
    Tailings dam failures, such as the Jagersfontein failure in the Free State province and the Fundão and Feijão failures in Brazil, have brought into question the ability of the mining industry to operate safely, threatening its social license. To improve the safety of tailings dams, leading indicators of dam safety should be monitored. The location and historical behaviour of the tailings decant pond provides insight into several such leading indicators and can be used as a proxy to flag potential construction issues. This work investigates the use of public multispectral data collected by the Sentinel-2 satellite mission to monitor the supernatant tailings dam decant pond. This is achieved by leveraging the cloud-based Google Earth Engine platform and open-source GIS tools. Sentinel-2 acquires visible and near infrared spectrum data with a spatial resolution of 10 m and a revisit time of 5 days. Pond data is obtained by visual assessment and automated thresholding of Sentinel-2 imagery. Thresholds of near-infrared (NIR) reflectance and the normalised difference water index (NDWI) obtained by a least square error analysis are investigated. Implementation of the method at three South African tailings dams, constituting four decant ponds, illustrates the capabilities and limitations of Sentinel-2 imagery. High spatial resolution (<5 m) multispectral satellite imagery and natural colour aerial orthophotos (<0.25 m) serve as reference data. Visually assessed Sentinel-2 pond data presented a bias towards slight over estimation of the pond area compared to reference data. Other leading indicators did not show systematic bias across all sites. In general, the deviation between Sentinel-2 and the reference measurements was high, indicating that Sentinel-2 imagery should be used with caution for measurements critical to dam safety. Site-specific thresholds of NIR and NDWI indicated that automated thresholding of the NDWI is superior to NIR reflectance alone. It is shown that Sentinel-2 timeseries imagery can be used in tailings dam monitoring to supplement existing construction surveillance frameworks and provide historical pond data in the absence of such information.
  • Thumbnail Image
    Item
    Water for Firefighting in Sol Plaatje Municipality, Northern Cape, South Africa
    (University of the Witwatersrand, Johannesburg, 2023) Thage, Tumelo MacAurthur; Ilemobade, Adesola
    In South Africa, SANS 10090 (SABS, 2018a) and the Red Book (DHS & CSIR, 2019) recommend that for firefighting municipal water distribution systems must have and maintain the capacity to provide water for firefighting purposes. van Zyl & Haarhoff (2007) state that the provision of water for firefighting is a dominant design consideration as it influences the sizing and outputs of critical components. Scheepers (2012) argues that fire flows acts ‘as the most limiting demand condition’ as when it required it is extracted in large quantities for a short period. The most commonly used fire flow values in the SANS 10090 have largely remained unchanged for several decades. In other words, these values have not been revised to take account of the evolution of municipal water consumption over more than 30 years. This suggests that the recommended water requirements for firefighting may no longer be fit for purpose. The literature review revealed that the fire flows in the Red book violates the same in the SANS 10090 - this is illegal as the SANS 10090 specifies enforceable absolute limits. Furthermore, the Red book and SANS 10090 provide different fire risk classifications and values for the different parameters and as such, inconsistent and lack uniformity. It is important for design engineers to have accurate input data when planning and designing for fire flow requirements as any deficiency in basic design information could lead to an insufficient capacity to fight fires or an over-design of water supply infrastructure. A question arose from these observations, which provided inspiration for this study: Are fire flows in the SANS 10090 and Red book appropriate for current firefighting efforts? In answering this question, the first step of this study was to identify participating municipalities that were willing to release their datasets on firefighting for this study. Sol Plaatje municipality was one of the willing municipalities. This study thereafter categorised and analysed information contained in the 3236 fire incident reports that occurred within Sol Plaatje Municipality during the period 21 July 2017 to 21 August 2020, and compared actual fire flow volumes and flow rate data against the SANS 10090, Red book and previous South African studies. In order to provide context and aid better understanding of the datasets, structured interviews were conducted with municipal officials responsible for firefighting operations at Sol Plaatje municipality. Key highlights of this study indicated: ∼ 93.3% of fires in Sol Plaatje municipality were extinguished using 7 Kℓ or less of water. This result is similar to previous studies- In a 2014 study more than 90% of fires in 5 Western Cape Towns were extinguished using less than 10 Kℓ of water; In a 2019 study, 75% of fires in the City of Johannesburg were extinguished using less than 6.60 Kℓ of water; and In a 2022 study, 87% of fires in the City of Johannesburg were extinguished using 10 Kℓ or less of water. Overall, 75%-93% of fires were extinguished in the various study areas using 10 Kℓ or less of water. For large fires in Sol Plaatje municipality, the average water volume used to extinguish 85 large Category 2 fires was 8.56 Kℓ or less of water. This finding is similar to that of the Western Cape 2014 study and the 2022 City of Johannesburg study that found that 8.6 Kℓ and 9.63 Kℓ or less of water extinguished 77 and 89 large category 2 fires, respectively. What is evident from the results is that the volumes of water used in Sol Plaatje and previous studies are significantly less that the specified values in SANS 10090 and the Red book. An adverse consequence of higher values is that it leads to an over-design of water supply infrastructure as it increases the volume of municipal storage required for firefighting and consequently, increases the total capacity of municipal storage. Increased storage capacity increases resources that are expended, as well as water retention times, which negatively affects water quality. This study validates the recommendations of previous studies that the fire flows in the SANS 10090 and Red book need to be revised to enable the efficient conservation of scarce water resources and optimal design of water systems.