Electronic Theses and Dissertations (PhDs)

Permanent URI for this collection

https://hdl.handle.net/10539/38002

Browse

Browsing Electronic Theses and Dissertations (PhDs) by SDG "SDG-7: Affordable and clean energy"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Colloidal synthesis and characterization of molybdenum and tungsten-based phosphide electrocatalysts for hydrogen evolution reaction
    (2022) Nkabinde, Siyabonga Sipho; Moloto , Nosipho
    The production of hydrogen gas via hydrogen evolution reaction (HER) in acidic media has become an important area of research in light of the increasing demand for sustainable and environmentally friendly sources of energy. However, its large-scale production is currently being hindered by the lack of inexpensive and highly efficient non-noble electrocatalysts. Transition metal phosphides (TMPs) have transpired as favourable catalysts that can be prepared from cheap and readily available sources. Up to now, TMPs have been commonly prepared using solid-state and solid-gas reactions, which rely on the use of high temperatures and hence generate inhomogeneity in the prepared materials. Inhomogeneous materials are unattractive as catalysts because the correlation between a catalyst and its structural features cannot be systematically studied. For this reason, colloidal synthesis has emerged as a powerful method in the synthesis of TMPs as it allows for control over the resulting physical features (i.e. size, morphology, crystal phase, crystallinity etc.). The ability to tailor these physical properties provides room for improving the catalytic activity. By using the colloidal synthesis method, we have successfully prepared molybdenum and tungsten-based phosphide nanoparticles and studied the effect of their physical features on HER activity. In chapter 3, we report a facile colloidal synthesis method to produce an amorphous phase of molybdenum phosphide (MoP) by using trioctylphosphine (TOP) as a phosphorus source, molybdenum pentachloride (MoCl5) as a metal source and 1-octadecene (1-ODE) as a solvent/reducing agent. The use of the forementioned precursors promoted the formation of very small, shape controlled and well dispersed amorphous molybdenum phosphide (MoP) nanoparticles. Annealing (800 °C) of the amorphous MoP nanoparticles resulted in the formation of a crystalline MoP phase with a slightly bigger size but retained its dispersity and morphology upon exposure to high temperature. The amorphous and crystalline MoP phases were compared as HER electrocatalysts. HER results indicated that the amorphous MoP phase exhibited enhanced catalytic activity in hydrogen evolution reaction compared to the crystalline MoP phase. The high activity displayed by the amorphous MoP was attributed to the small sizes and the high density of unsaturated active sites characteristic of nanoparticles lacking long range crystalline order.
  • Thumbnail Image
    Item
    Development of eco-friendly building bricks derived from carbon nanotube-reinforced coal ash and low-density polyethylene waste materials
    (University of the Witwatersrand, Johannesburg, 2024) Makgabutlane, Boitumelo; Maubane-Nkadimeng, M.S.; Coville, N.J.
    This study reports on the incorporation of carbon nanotubes (CNTs) into the all-waste derived building bricks. The focus was on waste management and beneficiation of plastic waste and coal ash, which are generated in large volumes without sufficient recycling. The waste materials were characterized using a range of techniques to ascertain their properties for application. Multiwalled carbon nanotubes (MWCNTs) were synthesized using a facile floating chemical vapour deposition method (CVD) and their physicochemical properties were tested. Bricks with dimensions of 220 x 105 x 70mm were developed with an optimum 85:15 coal ash to plastic waste ratio respectively using a specialized reactor. The bricks were tested for compressive strength, split tensile strength, water absorption, strain, thermal stability and durability using oxygen permeability index, chloride conductivity index and water sorptivity index as indicators. Furthermore, environmental and financial sustainability and ecotoxicology were tested. At optimum conditions, high quality MWCNTs with a diameter of 83 nm, length of 414 μm and a carbon yield of 73% were obtained. The ID/IG ratio of 0.44, an oxidation temperature of 649 °C, a purity of 94% and surface area of 50.9 m2/g were achieved. Coal fly ash with a spherical shape, particle size of below 10 micron and a thermal stability of 680 °C was used as an aggregate for the bricks. The bricks (without CNTs) developed their maximum compressive strength of 11.9 MPa at 14 days. The incorporation of the CNTs improved the microstructure of the bricks by filling the voids and providing a bridging effect as reinforcement mechanisms. The optimum CNT loading of 0.05 wt.% produced bricks with a compressive strength of 22 MPa and tensile strength of 8.7 MPa, which exceeded the South African National Standards (SANS227:2007) requirements for building bricks by 450% and 625% respectively. The durability properties were improved as the CNT dosage was increased from 0-10 wt.%. The 0.05 wt.% bricks were categorized as “good” for all the durability indexes. The CNT containing bricks showed improved thermal stability and maintained their structural integrity. The chemical resistance also improved and the efflorescence was minimal on all the bricks. The utilization of waste in the bricks enabled resource conservation, reduced pollution and reduced cost compared to conventional bricks. When only considering the raw materials used, the cost of production per brick was $0.091. The ecotoxicology of the powdered brick samples was tested on Raphidocelis subcapitata (microalga) and Daphnia magna (aquatic organism) using leachates from neutral, acidic and basic mediums. Some heavy metals were leached above the threshold limit especially in acidic medium. The leachates were toxic to the test species at low concentrations and resulted in growth inhibition of the microalga and immobization of the aquatic organisms. The toxicity of the CNTs was inconclusive and dedicated tests are required to study their effect. With appropriate treatment of CFA, the waste derived CNT bricks have a great potential of being a sustainable alternative to the conventional bricks based on cost, properties and environmental impact