The use of South African coal fly ash (CFA) as an additive to oil well cement during cementing operation
| dc.contributor.author | Kaduku, Tendai | |
| dc.date.accessioned | 2016-03-17T08:35:18Z | |
| dc.date.available | 2016-03-17T08:35:18Z | |
| dc.date.issued | 2016-03-17 | |
| dc.description | A research report submitted to the Faculty of Engineering and the Built Environment, University of the Witwatersrand, in partial fulfilment of the requirements for the degree of Master of Science in Engineering Johannesburg, South Africa 11 August 2015 | en_ZA |
| dc.description.abstract | This work reports for the first time in open literature, the beneficiation of South African coal fly ash (CFA) in oil well cementing operation. Firstly, CFA was characterized using X-ray Diffraction (XRD), X-ray Fluorescence (XRF), Scanning Electron Microscopy (SEM), proximate and particle size analyses. Silica (SiO2) was then extracted from the CFA through acid leaching using 3M hydrochloric acid (HCl) at 100 oC for 6 hours. The extracted SiO2 was filtered out, purified through successive demineralized water washings and dried in an oven at 200 oC for 2 hours. The physicochemical properties of the extracted SiO2 were analyzed using XRD, SEM and Fourier Transform Infrared spectroscopy (FTIR). Furthermore, the extracted SiO2 was reacted with sodium hydroxide (NaOH) at 80 oC and atmospheric pressure to produce sodium silicate, a commonly used oil well cement (OWC) slurry extender. The physicochemical properties of the synthesized sodium silicate (CFA-Na2SiO3) were compared to those of a commercial sodium metasilicate (com-Na2SiO3) using SEM, XRD and FTIR analyses. Moreover, OWC slurries with varying compositions of cement, distilled water and 2 % CaCl2 by-weight-of-water (BWOW) were prepared and extended using the synthesized CFA-Na2SiO3 and com-Na2SiO3 at compositions ranging from 0.25 – 2.5 % by-weight-of-cement (BWOC). A comparative study to evaluate the densities, compressive strength, and rheological properties of the slurries was carried out in accordance with the specification for materials and testing for Well Cements (API, 1990). The results obtained showed that the South African CFA belongs to Class F and contains 58 % SiO2, which is the desired component in this study. The physicochemical properties of the extracted SiO2 indicate that it is amorphous in nature. In addition, the synthesis protocol for making CFA-Na2SiO3 using the extracted SiO2 and NaOH, which was at a mild temperature compared to the traditional energy-intensive method, indicate the possibility of energy saving of the method used. Moreover, the physic-chemical properties of the synthesized CFA-Na2SiO3 are consistent with that of com-Na2SiO3, indicating the purity of the as-prepared CFA-Na2SiO3. Results obtained from the comparative study between the OWC slurries indicate that the slurries extended with CFA-Na2SiO3 have slightly lower densities, lower viscosities and higher compressive strength compared to those extended with com-Na2SiO3. This indicates that CFA-Na2SiO3 slurries would be easier to pump and preferable where early strength development is critical. Evaluation of the thickening times of the slurries could not be done at the time when this study was carried out due to the non-availability of the HPHT consistometer. This evaluation is therefore recommended for future studies. This report thus opens up a way for the beneficiation of South African coal fly ash in the petroleum, oil and gas industry. Evaluation of the performance of the CFA-Na2SiO3 in remedial cementing as a complement to a cement squeeze and for blocking gas migration is recommended for future studies. Furthermore, the evaluation of the performance of the CFA-Na2SiO3 as an additive to drilling fluid is also recommended. | en_ZA |
| dc.identifier.uri | http://hdl.handle.net/10539/20109 | |
| dc.language.iso | en | en_ZA |
| dc.title | The use of South African coal fly ash (CFA) as an additive to oil well cement during cementing operation | en_ZA |
| dc.type | Thesis | en_ZA |
Files
Original bundle
1 - 4 of 4
No Thumbnail Available
- Name:
- ABSTRACT-PAGE-KADUKU-TENDAI-911261-MSc-Report-2015.pdf
- Size:
- 248.38 KB
- Format:
- Adobe Portable Document Format
- Description:
No Thumbnail Available
- Name:
- RESEARCH REPORT MScEng-Approved-Final-July-2015.pdf
- Size:
- 2.25 MB
- Format:
- Adobe Portable Document Format
- Description:
No Thumbnail Available
- Name:
- Conference paper.pdf
- Size:
- 4.78 MB
- Format:
- Adobe Portable Document Format
- Description:
No Thumbnail Available
- Name:
- MANUSCRIPT- UNDER REVIEW.pdf
- Size:
- 1.34 MB
- Format:
- Adobe Portable Document Format
- Description:
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 1.71 KB
- Format:
- Item-specific license agreed upon to submission
- Description: