Research Outputs (Oral Health Sciences)
Permanent URI for this collectionhttps://wiredspace.wits.ac.za/handle/10539/18776
Browse
11 results
Search Results
Item Systematic review of factors influencing oral healthrelated quality of life in children in Africa(2019-07-24) Kolisa Y; Yengopal V; Igumbor J; Nqcobo CBackground: Oral health-related quality of life (OHRQoL) is influenced by cultural and societal context. Existing OHRQoL children measurement tools have been conceptualised in high-income countries. Probing whether the factors influencing OHRQoL are context-reliant in the African setting is necessary and is the purpose of the current review. Aim: To investigate if the factors influencing OHRQoL are context-reliant. Methods: Seven databases were searched using search terms (‘oral health’; and ‘quality of life’, ‘health-related quality of life’, ‘patient-reported outcomes’, ‘well-being’; and ‘child*’, ‘adolescents’, ‘teen*’, ‘youth’; and ‘determinants’, ‘factors’, ‘predictors’; and ‘oral health quality of life tools/instruments/scales’; and ‘Africa*’). Abstracts identified were exported to a reference software manager. Three of the authors used specific selection criteria to review, firstly, 307 abstracts and, secondly, 30 full papers. Data were extracted from these papers using a pre-designed data extraction form, after which quantitative synthesis of data was performed. Results: Key factors influencing OHRQoL followed an existing conceptual framework where environmental and individual factors in the form of socio-economic status (SES), area of residence and children psyche status, and the presence of any oral condition other than dental caries were reported among child populations in Africa. Conclusion: There is preliminary evidence to suggest an association between individual factors such as children’s psyche and oral problems, excluding dental caries, and environmental determinants such as area of residence and SES in children’s OHRQoL in African children. The finding that dental caries was not a key factor in child-oral health is unexpected. There seemed to be a contextual viewpoint underpinning the current OHRQoL frameworks and OHRQoL was context-reliant.Item Zinc oxide-eugenol and calcium hydroxide pulpectomies in baboon primary molars: histological responses(2004) Cleaton-Jones, P.; Duggal, M.; Parak, R.; et alAIM: To compare histological responses to zinc oxide-eugenol (ZOE) and calcium hydroxide (CH) pulpectomies in primary molar teeth with inflamed pulps. STUDY DESIGN:This was an experimental study in 17 juvenile baboons (Papio ursinus). METHODS: Pulpitis was induced with fresh human carious dentine or Streptococcus mutans placed into occlusal cavities in 78 primary molars; after 14 days a pulpectomy was performed on the same primary molars with the two root fillings randomly allocated. The root canal openings were then covered with IRM and the cavity filled with amalgam. After 90 days specimens were harvested and examined under the light microscope with the examiner blind to the treatment. RESULTS:Reaction frequencies in the ZOE-treated versus CH-treated teeth were: no recognisable pulp 89% and 82%, internal root resorption 0% and 1%, external root resorption 11% and 24%, presence of bacteria 5% and 18%, periapical abscesses 24% and 52%. STATISTICS:Fisher's exact probability test showed a statistically significant higher prevalence of periapical abscesses in the CH-treated group (P=0.03, relative risk 2.2). CONCLUSIONS: ZOE pulpectomy is preferred to CH for the treatment of infected pulps in primary molarsItem Golden jubilee for Dental Research Institute(2004) UnkownItem How well do fourth year Wits Dental Students place resin composite restorations?(2003) Lightfoot, J.; Clarke, F. M.; Grossman, E. S.OBJECTIVES:To evaluate, by means of a scanning electron microscope (SEM) the quality of resin composite restorations, placed as a first attempt by fourth-year dental students. METHODS: Ten Class IV direct composite restorations, placed in plaster-mounted extracted incisor teeth as part of pre-clinical course requirements, were selected. Specimens were evaluated and graded on a two-point scale by a staff member according to departmental clinical evaluation criteria. Five restored teeth were prepared for surface evaluation of marginal integrity, surface roughness and contour using SEM. The remaining specimens were embedded in resin and ground down transversely, parallel to the incisal edge until a dentine core was apparent. The ground surfaces were polished, prepared for SEM and assessed for etched layer, placement of bonding agent, composite adaptation and overall consistency. RESULTS: Clinical assessment and SEM surface evaluation correlated favourably for all criteria, except contour, indicating that students were reasonably competent in finishing techniques. Ground samples revealed acceptable etched enamel layers and marginal adaptation. Bonding agent thickness varied between 0 and 200 microns casting doubt on procedural accuracy. Porosities and voids were apparent within the resin composite. Internal features were the main reason for unsatisfactory grades. CONCLUSIONS: Students placed restoration satisfactorily. They would benefit if able to examine sectioned restorations to understand critical placement techniques which would contribute to resin composite restoration success. A research component can be introduced into the dental undergraduate curriculum by way of similar projects linked to didactic course-work.Item Clinical, histological and microbiological study of hand-excavated carious dentine in extracted permanent teeth(2003) Bönecker, M.; Grossman, E.; Cleaton-Jones, P. E.; et alChanges in cultivable flora in dentine samples collected before and after hand excavation were examined in association with clinical status of the cavity surface, light microscopy and scanning electron microscopy (SEM). Thirty-five extracted permanent molar teeth with an occlusal caries lesion were excavated with hand instruments according to the atraumatic restorative treatment (ART) approach. Excavation pressure, dentine colour and consistency were recorded at the dentine-enamel junction (DEJ) prior to carious dentine removal and at the cavity floor after the final excavation; a microbiological sample of dentine was taken at both stages. Twelve restored teeth; six with positive and six with negative bacterial growth on the second sample, were selected for light microscopy and SEM. The hand-excavation removed tooth structure was soft, irreversibly damaged, dark and highly infected. Hand excavation reached dentine of increased hardness with a more normal colour to provide a sound structural base for restoration. Light and SEM examination of the cavity floor showed infected dentinal tubules in all 12 teeth examined. Linear logistic analysis showed a statistical association between light-yellow dentine on the cavity floor and an absence of bacterial growth (P = 0.006). This short-term in vitro study showed that caries-producing bacteria remained in dentine close to the cavity floor in 26/35 teeth despite clinical observations that indicated a suitably prepared cavity floor.Item Surface roughness values for resin based materials(2004) Grossman, E. S.; Rosen, M; Cleaton-Jones, P.E; et alINTRODUCTION: Surface roughness of dental restorative materials is most often established with the Ra value obtained using profilometry or by assessing surface topography with the scanning electron microscope (SEM). Both methods should validate each other in confirming surface roughness. AIMS AND OBJECTIVES: The purpose of this study was to compare surface roughness values obtained with a profilometer to the SEM appearance of 6 resin-based restorative materials and assess whether Ra was appropriate as a sole surface roughness measure. Methods Six 5mm diameter specimen discs of Prodigy (Pr); Z100 (Z); Compoglass F (C); Hytac Aplitip (H); Photac-Fil (Pf) and Vitremer (V) were prepared against Mylar strips and stored in distilled water for 14 days. One side of each disc was sequentially polished with Soflex discs to super fine state, the other side remained unpolished. Three surface roughness measurements were made on each surface (n=18) recording Ra, Rv, Rp and Rt values, this data was subjected to a four way ANOVA and Tukey's Studentised Range Test (p=0.05). Two unpolished and two polished discs per material were prepared for SEM, evaluated and visually grouped for surface roughness. RESULTS: Approximate ascending order of roughness was Z, Pr, H, C, V, Pf for Ra, Rv, Rp and Rt and un/polished treatment. Polishing increases surimens into a "bland" (Pr, H, Z, C) and "textured" group (Pf and V). The polished specimens gave four groups: (Pr), (Z and C), (H) and (V and Pf) of increasing surface complexity. Polishing caused surface scratching, removed the matrix, reduced or removed filler particles and exposed voids within the material. CONCLUSIONS: This study emphasises the importance of using more than one technique to assess surface roughness. Rv and Rp values should be utilised to better understand polish induced surface feature changes. Rv maximum is a better measure to identify surface defects which could affect restoration longevity.Item Analysis of attendance rates at Soweto dental clinics 1995 - 2002(2004) Harkison, B. N.; Cleaton-Jones, P. E.BACKGROUND: Patient attendance rates at Soweto dental clinics increased during the year after the implementation of free primary oral health care in 1995. OBJECTIVE: This study was performed to examine if the attendance rates continued to increase between April 1995 and March 2002. MATERIALS AND METHODS: Monthly clinic records were used to record casual (pain and sepsis treatment) and booked patient attendance (restorative, prosthetic and orthodontic treatment) and number of dental operators in the nine primary health care clinics and one hospital clinic in Soweto. Data were analysed with SAS and Prism software. RESULTS: Total patient attendances in the primary health care clinics significantly increased from 6,161 in 1995 to 10,519 in 2002 (P<0.05) due to an increase in casual patients Booked patients decreased and patients treated per operator increased. In the hospital clinic the casual patient attendances decreased but booked patients significantly increased (P<0.005). CONCLUSIONS: Patient attendance rates increased between 1995 and 2002 with an increase in dental operator workload.Item Spreadability of two glass ionomer cements used in Atraumatic Restorative Treatment (ART)(2004) Sindhu, R.; Grossman, E. S.'Press finger' in atraumatic restorative treatment (ART) is used to spread a glass ionomer cement (GIC) to seal the restoration margin and adjacent pits and fissures. This study compared the spreadability of Fuji IX and Ketac-Molar to establish which was best suited for this purpose. Twenty equally spaced cavities (35 mm apart) were machine-cut in each of two Perspex slabs 200 x 100 x 20 mm. Each cavity was 3 mm deep with a 4 mm diameter. Two V-shaped grooves 1 mm deep were cut to traverse the cavities: one 0.5 mm wide, the other 0.25 mm wide. Equal amounts (0.25 ml) of GIC were dispensed, 20 cavities for Fuji IX and 20 for Ketac-Molar and condensed under light finger pressure using a 20 mm diameter cork thinly coated with petroleum jelly. This allowed the GIC to be condensed into the cavity and spread into the differently sized grooves. The samples were stored in deionised water for 24 hours whereafter the length to which the GIC had spread along each groove from the cavity edge was measured to the closest 0.01 mm. The data were analysed using ANOVA and the unpaired Student's t-test (P < 0.05). There was a statistically significant difference between the length of spread of the two GICs (t = 2.534; P = 0.013) which was confined to the 0.25 mm width groove (t = 2.83; P = 0.007) with Fuji IX spreading much further along the groove (10.25 +/- 1.17 mm) than Ketac-Molar (7.66 +/- 4.21 mm). Fuji IX appears to be the better sealant material when selecting for spreadability in ART.Item Pulpitis induction in baboon primary teeth using carious dentine Streptococcus mutans(2004) Cleaton-Jones, P.; Duggal, M.; Parak, R.; et alThe objective of this equivalency study was to see if a colony of Streptococcus mutans placed into cavities in primary molar teeth produced pulpitis similar to an established pulpitis induction method using carious dentine. In two juvenile baboons (Papio ursinus), occlusal cavities were cut in all 16 primary molar teeth, followed by making a small pulpal exposure after which the cavity was swabbed with 37 per cent phosphoric acid. In one half of the teeth, fresh soft human carious dentine was placed over the pulpal exposure; in the remaining teeth the exposure was covered with a colony of Streptococcus mutans in agar. All the cavities were restored with unlined light-cured composite resin. After 14 days specimens were harvested and examined under the light microscope with the examiner blind to the induction method. In both groups of teeth there was recognisable pulp, hyperaemia, micro-abscesses in the pulp and peri-apical abscesses. Reactions to soft caries were more severe than to Streptococcus mutans. The results show that Streptococcus mutans placed in a cavity with an exposure produces comparable pulpitis to fresh soft human carious dentine in the same type of cavity and that both methods produce pulpitis suitable for testing pulpotomy or pulpectomy treatments.Item Dental Research Institute: silent contribution of fifty years: 1954-2004(2004) Cleaton-Jones, P.; Grossman, E.