Browsing by Author "Mpala, Josephine Tshepiso"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Silver nanoparticle-modified cellulose nanocrystals for fouling control in membrane distillation
    (University of the Witwatersrand, Johannesburg, 2023-06) Mpala, Josephine Tshepiso; Nthunya, Lebea; Richards, Heidi; Etale, Anita
    A global reduction in water resources and the growing demand for fresh water has motivated the quest for the development of sustainable water-augmenting technologies. Membrane distillation (MD) is envisaged as an attractive desalination technology, surpassing cost challenges faced by conventional desalination technologies. Yet, its industrial commercialization faces multiple limitations, including the production of low water fluxes, membrane wetting and membrane fouling. This study sought to investigate the performance of silver nanoparticles (AgNPs) embedded on cellulose nanocrystals (CNCs) (CNC-capped AgNPs) to lessen the impact of biofouling in MD. This was conducted through coating the polyvinylidene fluoride (PVDF) membrane with CNCcapped AgNPs. Prior to coating with CNC-capped AgNPs, PVDF membrane properties were improved (for MD suitability) through blending with polyvinylpyrrolidone (PVP) and functionalized carbon nanotubes (f-CNTs). The resulting membrane had an improved overall porosity, and a respective increase in surface roughness (75%) and mechanical strength (45%). Pristine CNC-capped AgNPs’ characterization presented stable AgNPs with minimal leaching. Transmission electron microscopy (TEM) micrographs revealed a uniform dispersion of spherically shaped AgNPs exhibiting 13.3 ± 3.4 nm average diameter. The presence of AgNPs on the surface of CNCs afforded excellent thermal stability and good anti-microbial activity, mainly against E. coli, P. aeruginosa, S. aureus, S. epidermis, and S. saprophyticus. Following membrane modification, preliminary anti-bacterial tests conducted on the CNC/AgNP-modified PVDF membrane revealed a 98.7%, 52.3%, 78.0%, 53.9% and 93.3% reduction of E. coli, P. aeruginosa, S. aureus, S. epidermis, and S. saprophyticus cells, respectively, demonstrating its ability to control biofouling. Although the CNC/AgNP-modified PVDF membrane exhibited improved membrane properties, such as high surface roughness, high liquid entry pressure (LEP), and good hydrophobicity, its performance in MD (with artificial seawater as the feed stream) was poor, producing the lowest average water flux (0.179 ± 0.0303 kg/m2 /hr) compared to the unmodified PVDF membrane (0.528 ± 0.0838kg/m2 /hr), mainly due to pore blockage. However, upon spiking the artificial seawater with a monoculture of G. Stearothermophilus, the CNC/AgNP-modified PVDF membrane displayed the most stable water flux while the unmodified PVDF membrane’s water flux decreased by 79.3% over the 24-hour (h) period. This was attributed to the formation of a biofouling layer on the PVDF membrane which was absent on the CNC/AgNP-modified PVDF membrane. The AgNPs on the surface of the membrane afforded minimal bacterial deposition during operation. These results ascertain the possibility of biofouling minimization in MD using CNC-capped AgNPs, contributing to MD’s body of work for its ultimate realization for up-scaling.