Experimental investigation into a passive auto-tuning mass damper for structural vibration control of a MDOF system
Date
2016
Authors
Naicker, Elizabeth Nicole
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
A Passive Auto-Tuning Mass Damper with Pulley connections (PATPD) is a vibration control
device that consists of a box filled with silica sand on roller supports. The silica sand provides
the mass of the damper. The PATPD is connected to the structure to be controlled by a group of
ropes and pulleys; it is free to move in any translational direction. The pulleys and rope transfer
a driving force to the damper, caused by the movement of the structure. The mass provides an
inertial force which, in addition to the driving force of pulleys, dissipates energy providing the
vibration control of the structure.
Firstly, the test model underwent ‘PATPD Efficiency tests’ where the model was subjected to
free translational, torsional and coupled vibration both with and without damper. This
procedure was then repeated for forced harmonic excitation and the control effect for both
analysed. These tests aimed to demonstrate the effectiveness of the PATPD at controlling
structural vibrations. The results indicate that the PATPD provided at least 99% reduction to
first natural frequency Power Spectral Density (PSD) peak for all tests, with relatively minimal
increases for others.
The model then underwent ‘Parameter Tests’ where the damper characteristics were changed
and test procedure above repeated. These tests aimed to investigate the effect of the property
changes of the PATPD on its ability to control free and forced vibration. The results indicate
that (a) the PATPD provided significant reduction to first natural frequency PSD peak for all
tests and (b) the properties of the PATPD affected the amount of control provided to the
structure thus optimization of the PATPD could result in improved control effect.
The models’ ‘Dynamic Properties’ namely model mass and stiffness were changed and test
procedure repeated. These tests aimed to demonstrate the auto-tuning or adaptivity of the
PATPD in its ability to control free and forced vibration. The results indicate that for all tests
performed the PATPD provided significant reduction to first natural frequency PSD peak for all
tests, with relatively minimal increases for others. The PATPD worked over a wide frequency
band and was able to adapt to frequency changes providing significant control effect.
Additional forced vibration tests under specific frequencies close to and far away from the
models’ natural frequency demonstrates PATPD adaptability and efficiency. In addition tests
under random excitation (as could be expected for earthquake loading) demonstrated PATPD
positive control effect, adaptability and efficiency.
Description
A research report submitted to the Faculty of Civil and Environmental Engineering,
University of the Witwatersrand, Johannesburg, in partial fulfilment of the requirements
for the degree of Master of Science in Engineering.
13 October, 2016
Keywords
Citation
Naicker, Elizabeth Nicole (2016) Experimental investigation into a passive auto-tuning mass damper for structural vibration control of a MDOF system, University of Witwatersrand, Johannesburg, <http://wiredspace.wits.ac.za/handle/10539/22289>