Attainable operating regions: Synthesis and analysis of gasification systems
Date
2012-02-14
Authors
Ngubevana, Lwazi Bonginkosi
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Process synthesis deals with the development of synthesis tools to help improve process
efficiencies, energy efficiency, capital and operating expenses for the process industries. In
recent years, researchers have focused on process synthesis tools such as the ‘Attainable
Regions’ technique, and many other complex mathematical formulations have been developed
for different applications. All these tools assist the design engineer to identify all possible
outputs, by considering only the given feed specifications and permitted fundamental processes.
This work contributes to the development of a process synthesis tool in the form of systematic
graphical techniques that look at the processes of coal gasification and coal-methane cogasification.
This tool is also used to look for opportunities to improve efficiencies of these
processes and to reduce carbon dioxide emissions.
By making a few reasonable assumptions; the mass balances, the energy balance and reaction
equilibria around a gasifier can be set up. This thesis deals with how these balances are set up;
also looks at what effect the feed composition and choice of reactor conditions (temperature and
pressure) may have on the possible gasifier product.
This tool is used to analyse; the partial pressures of components through the gasifier, reaction
equilibria, reaction paths and syngas composition (CO:H2 and CO2:H2 ratios) given certain
operating conditions and the results were found to be consistent with literature.
The traditional requirement of a CO:H2 ratio of 2 for Fischer Tropsch (FT) synthesis is explored.
Of biggest interest is a proposed new FT chemistry as proposed by Patel et al. This chemistry
proposes setting a CO2:H2 ratio of 3 as the target for FT synthesis. Some optimisation work is
also done on the possible syngas composition for both the traditional and proposed chemistry
routes.
Coal and methane co-gasification is also explored using this tool and the results are shown to be
consistent with literature.
The result of this approach shows that we can work in a stoichiometric subspace defined by the
energy and mass balance. Furthermore we can show that gasification is energy and not work
limited which has implications for the design and operation of these units.