Optimization of boride containing boron suboxide (B6O) materials

DSpace/Manakin Repository

Show simple item record

dc.contributor.author Johnson, Oluwagbenga Temidayo
dc.date.accessioned 2012-01-31T10:48:56Z
dc.date.available 2012-01-31T10:48:56Z
dc.date.issued 2012-01-31
dc.identifier.uri http://hdl.handle.net/10539/11212
dc.description.abstract The search for suitable sintering additives for boron suboxide (B6O) materials which could improve densification, reduce sintering temperature and tailor the microstructure has been of great importance. In an earlier study it was shown that transition metal borides qualify as sintering aids for B6O, but partial segregations of the boride secondary phases were found. In this work, efforts have been made to investigate in detail, factors which influence the mechanical properties of boride containing B6O materials and to understand the processing-to-microstructure-to-properties (hardness & fracture toughness) relationships for this class of materials. Based on this knowledge, the fabrication of B6O-based materials with tailored properties could be possible for industrial applications such as cutting tool, drill bits, grinding wheels, abrasives and ballistic armour. A reaction couple of sintered B6O, cobalt or nickel and green compact B6O were assembled and heat treated at 1850oC for 20 mins. XRD and SEM examinations of the reaction zone showed the formation of cobalt boride and nickel boride respectively, at the interface, which diffuses into the B6O compacts. This is an evidence of good wetting between the boride and the B6O phase. The relationships between densification and microstructure and mechanical properties (hardness and fracture toughness) of boron suboxide (B6O) materials have been studied in detail using hot pressing technique. B6O powders were initially milled using steel balls in an attrition mill to drive the particle sizes down to sub-micron range. Contaminations from steel balls were acid washed in HCl. The amounts of impurities remaining in the powders were characterized using Inductively Couple Plasma (ICP) technique. Sub-micron B6O powders were then coated separately with different volume content of cobalt and nickel using precipitation method. Additionally, admixing of B6O powder with different TiB2 powder, and boron with TiO2 powder was done in an attrition mill. Hot pressing experiments were conducted in a temperature range of 1750oC–1900oC under pressures of 50-80MPa for 5-40mins in an argon atmosphere. The microstructure and phase composition of the hot pressed materials were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffractometry (XRD). Densities of the samples were measured to determine the extent of densification. Vickers hardness and fracture toughness measurements were used to characterize the mechanical properties of the hot pressed materials. The B6O materials with boride sintering additives showed higher density in comparison with the pure B6O material despite the fact that the sintering temperature of these materials was 50oC lower. Although the hardness of pure B6O was 30.2 GPa (1kg load), it was found to be brittle. Materials with increased fracture toughness [from 1 for pure B6O to 3-6 MPa.m0.5 for B6O with boride additives (Indentation-Method)] with only slightly reduced hardness were prepared. It was found that the composition of the grain boundary phase in B6O materials is very important for the tailoring of the mechanical properties. en_US
dc.language.iso en en_US
dc.title Optimization of boride containing boron suboxide (B6O) materials en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search WIReDSpace


Advanced Search

Browse

My Account

Statistics