The aqueous electrophoretic deposition (EPD) of diamond-diamond laminates
Date
2013-02-11
Authors
Džepina, Branislav
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
It is known that the wear resistance of polycrystalline diamond (PCD) is inversely
proportional to the particle size of the diamond powder which is to be sintered.
Fracture toughness on the other hand is directly proportional to the particle size of the
starting powder. Therefore, fracture toughness and wear resistance work
antagonistically. A layered PCD structure made by using powders with a relatively
small particle size could result in a more fracture resistant cutter while still retaining
desirable wear properties. The focus of this project was to determine if a layered
diamond structure could be made by electrophoretic deposition (EPD) and whether the
sintered laminate showed crack deflection during fracture.
The aqueous EPD of a diamond/diamond laminate with two alternating grades of diamond was investigated. Diamond particles, 0.5μm and 2μm in size, were deposited
in an alternating manner onto tungsten carbide substrate. The layered diamond deposit
was sintered with the carbide substrate in a high-pressure, high-temperature press. The
sintered deposit was examined for evidence of alternating residual stresses. Differences
of cobalt content in the 0.5 and 2μm layers were observed by EDS and image analysis.
The sintered diamond laminate was subjected to three-point bending until fracture.
Although the sample had demonstrated only minimal crack deflection during the bend
test, further analysis revealed that a sintering cooling crack showed evidence of crack
deflection.